Description
A step above typical POU (Point-Of-Use) water heaters, DHC Classic series offers a better heating element design and incorporates an internal flow adjustment screw, which allows to fine-tune the hot water temperature as needed. Compact and elegant, can be installed installed inside the cabinet or out. DHC 8-2 Classic will provide a 65°F temperature increase at 0.75 GPM or 50°F at 1.0 GPM.
Important:
this model does not come with a flow restrictor or an aerator and has a minimum activation flow rate of 0.69 GPM – make sure determine your fixture flow rate and groundwater temperature prior to purchasing to ensure proper performance. DHC 8-2 Classic is well suited for all US regions and output hot water temperature would vary depending on fixture flow.
Cross-References:
- American Hometec: AHQ-C10 (setting 2)
- Bosch: US 7
- Chronomite: SR-30
- Eemax: EX75
- Hubbell: R007-2S
- Powerstream / Powerstar: RP7, AE 7.2
- Seisco: POU70-240, POU80-240
Features:
- Manually adjustable hot water flow (via internal screw) – allows to fine-tune the amount of water flowing through the water heater to achieve desired temperature
- Superior reliability, built-in dry-fire and failure protection, high limit safety switch
- No PRV’s, expansion tanks or circulating valves needed
- No standby heat losses
- Perfect for single-fixture applications in both residential and commercial settings
- Made in Germany
Technical Specifications:
- Voltage: 240 or 208V (hardwired)
- Output: 7.2kW at 240V (5.4kW at 208V)
- Amperage: 30A at 240V (26A at 208V)
- Min. recommended wire size: 10/2 AWG
- Min. recommended curcuit breaker size: 30A
- Water Connections: 1/2″ Male NPT
- Min. activation flow rate: 0.69 gpm
- Nominal water volume: 0.13 gal
- Max. operating pressure: 150 psi
- Tested to pressure: 300 psi
- Dimensions (Height x Width x Depth): 14-3/16″ x 7-15/16 x 3-7/8″
- Weight: 5.5 lb
Warranty:
7 years leakage / 3 years parts
Reviews
There are no reviews yet.